Modern Gray Red Oak Engineered Hardwood Flooring
15mm multilayer Red Oak engineered hardwood flooring with a clean gray wood look and textured matte finish.
$7.86 / sq ft
Product Description
Driftwood Grey delivers a modern gray oak appearance with contrasting wood grain that works well in contemporary, minimalist, and cool-toned interiors. A 3mm Red Oak veneer is supported by a stable multilayer plywood core, while the wire-brushed matte UV lacquer surface adds texture and visual depth. The 1900 × 190 × 15mm T&G planks support floating, glue-down, and nail-down installation.
Specifications
Multilayer Parquet Elements
Top layer: red oak veneer; Multi-layer base: high-quality plywood to resist warping and twisting
Pattern of surface
Full plank,matt Lacquer, wire brushed
Finishing
Finished with 7 layers:
1 layer of UV filler + 1 layer of UV cream stain primer + 5 layers of UV lacquer. Gloss: 8-12 GU
1 layer of UV filler + 1 layer of UV cream stain primer + 5 layers of UV lacquer. Gloss: 8-12 GU
Connection
T&G
Length
74-4/5’’(1900 mm), (+/- 1,0 mm)
Width
7-1/2’’(190 mm), (+/- 0,2 mm)
Thickness
3/5’’(15 mm), (+/- 0,2 mm)
Top Layer Thickness
3 mm, (+/- 0,2 mm)
Packet
6 boards = 23,31 sq ft
Pallet
50 packets = 1165,74 sq ft
Short board proportion of 40% per box is allowed(two short boards with length 1900mm merged into one full length)
Appearance
High-quality surface veneers are strictly sorted on this product which makes it be more natural and luxurious when the super-large size is used on the board . The wirebrushed technology makes the surface texture more beautiful and makes it possible to creat a cosy distinguished interior with touch comfort and safety.
Hardness
Hard wood
Dimension Stability
The unique structural design of the base material makes the floor board tolerates well even significant changes of temperature and humidity within room.
Installation Methods
Floating, glue-down, nail-down
Veneer Grade
AB
Sound Knots
Sound Knots: healthy, diameter≤20 mm(0,79 in), ≤4 per plank.
Unsound Knots
Unacceptable
Sapwood/White Edge
≤ 20% board’s width; ≤ 40% board's length. max 15% of boards with this feature in batch
Bark Pockets
≤ 10 mm (0,4 in) width * 30 mm (1,18 in) length
Frontal Cracks / Splits
Unacceptable
Surface Cracks
Unacceptable
Lightning Shake
Unacceptable
Decay
Unacceptable
Worm Holes
Unacceptable
Rough Edge
Unacceptable
Slope of Grain / Curly Grain
Acceptable
Pitch of Tree
Unacceptable
Colour Variation
Acceptable (Extremely abnormal wood colors are not accepted)
Sticker Marks
Unacceptable
Biodegradation
Unacceptable
The knots and bark pockets may be smaller or not appear if other features affect the selection criteria
Lipping
(between elements) [mm]
≤ 0,2 mm(0,008 in)
Deviation of Rectangularity
(on the item width) [mm]
≤ 0,36mm (0,014 in)
Crosswise Warping
(across the item)[mm]
≤ 0.2%*board width
Spring
(along the element) [mm]
Convex ≤ 0.5%*board length；Concave ≤ 1.0%*board length
Moisture content [%]
6%-9%（ASTM D4442）
Coating Adhesion
≥3B （ASTM D3359）
Grindability
Min 150 rev. (EN13329, S-33)
Reaction to Fire
Dfl – s1
Emission of Formaldehyde
CARB 2
Resistance to cold and hot cycles test
No obvious cracks and no bulging.
Content of Pentachlorophenol
NPD
